Layersets are logical containers, that can contain one or more layerset-instances (WMS services). A typical example is the differentiation between a layerset “main” for the main map and a layerset “overview” for the overview map. You can define more layersets to show them optionally on the map or to use them in the layertree in their own folders (thematic layers).
Layerset-instances contain the options how a WMS is called: image-format, info-format, exception-format, scales for the different layers and many more.
As soon a WMS service is integrated in a layerset, it is linked as a layerset-instance with the application.
The screenshot above shows the instance
7/24 based on a WMS service. The associated data source is number 7, the layerers instance itself has the number 24. It is based on the WhereGroup OSM service and can be configured for the application in this dialog.
The properties of the WMS-Capabilities:
- Title: Title of the instance that is shown on the list of layersets and their instances.
- Format: The image format which is used to get the map images for the application via the GetMap request. For raster data and aerial imagery the JPG format is recommended, in case of street maps the PNG format should be preferred. If you are in doubt: PNG.
- Infoformat: The format which is used for the GetFeatureInfo requests to the WMS. In doubt: text/html or an analog HTML format that can be used in the dialog of the FeatureInfo element. Another possibility is text/plain.
- Exceptionformat: The format for error-messages that are returned by the WMS service.
The properties for the application
- Opacity: Choose the Opacity in percent. This value can be changed by the user in the Layertree, if it’s made available in the corresponding menu.
- Tile buffer: This parameter applies to services that are tiled and specifies whether to retrieve more surrounding tiles. With that they are already downloaded and visible during a pan movement. The higher the value, the more surrounding tiles are retrieved. Default: 0.
- BBOX-Factor: This parameter applies to services that are not tiled. You can specify how big the returned image should be. A value greater than 1 will request a larger map image. Default: 1.25 and you are free to set it to 1.
- Vendor Specific Parameters: See below.
- Visible: The service can be set visible with this option.
- BaseSource: The service should be treated as BaseSource. This affects the BaseSourceSwitcher, which should only display BaseSources, and the Layertree, where these BaseSources can be hidden. See also the hints below.
- Proxy: If activated, the service will be requested via a proxy in Mapbender. See the hints below.
- Transparency: If this switch is enabled (that is the default), the service is requested with a transparent background. So in the WMS GetMap request with the parameter
- Tiled: The service is requested in tiles. The standard is not tiled. See the following hints.
There are two ways to pass the layer order to the layer tree:
- QGIS Style
This distinction has its origins in the way WMS services and capabilities documents are built.
The OGC reference-implementierung of a WMS describes the structure of an example WMS at: http://metaspatial.net/cgi-bin/ogc-wms.xml?REQUEST=GetCapabilities&SERVICE=WMS&VERSION=1.3
This WMS displays some point, line and polygon objects and raster images. The Capabilities document lists the image data (e.g., DTM) more at the top of the document than the points (e.g., osm_points as the penultimate layer). Mapbender takes this approach both in the DataSources, where the service is loaded and registered in Mapbender, as well as in the Layerset instances.
In the layer tree, however, the order revolves, because from our experience the user is used to the fact that the layer that is listed higher up in the layer-tree is also drawn as the top layer. A user also has this experience when using a desktop GIS. Points are then in the layer tree above raster data, which is usually placed below.
The QGIS Server <https://www.qgis.org/> _ behaves differently here. A WMS can be easily deployed to a QGIS server using the QGIS project file, and the order of the layers in the WMS Capabilities is then the same as the order used in your own QGIS project. So in general: points above, further below the lines, then finally the polygon data or raster images. QGIS and QGIS servers are not the only programs that do that, but the best of these. This whole thing is again irrelevant for the GetMap call, because the order of the requests and how they are delivered to the server and back is solved in the WMS specification.
The following table summarizes the behavior again:
|layer order standard||layer order QGIS style|
|WMS Capabilities (from top to bottom)||polygon, line, point||point, line, polygon|
|Layerset-Instance (from top to bottom)||polygon, line, point||point, line, polygon|
|Layertree (from top to bottom)||point, line, polygon||point, line, polygon|
This allows Mapbender to respond in the different ways that a WMS Capabilities document can be built up by simply adjusting the order in the layer tree.
The layer table offers several checkboxes and two scale visibility fields that adjust the functionality of your Service Instance. Please note that the checkbox on top changes all the layer instances for the respective configuration at once.
- Title: Layer title from Service information shown in Mapbender3, adjustable.
- Active (on/off): Enables/disables a layer for the individual application layer. If not set, all other checkboxes of the same layer will be ignored.
- Select on: Selectable in geodata explorer.
- Select allow: Layer is active when the application starts.
- Info on: Layer provides feature info requests, info default activates the feature info functionality.
- Info allow: layer info is active when the application starts.
- Minscale / maxscale: the scale range in which the layer should be displayed, 0 or no entry = no scale limitation.
- Toggle: Opens the folder on start of the application.
- Reorder: Allows to reorder the layers with drag & drop while using the application.
- … -> Opens a dialog with more information:
- Layer’s name: Layer name of the service information (for getMap-Requests, not adjustable).
- Style: If a WMS provides more than one style, you can choose a different style than the default style.
Notes on the effects of each configuration¶
There are many ways to fill the Layertree and work with basic services: - e.g. by hiding them in the layer tree and using the BaseSourceSwitcher. - Or to work with the possibilities of the thematic layer tree, to create different layersets and distribute the basic services and thematic services in them to place them in the layer tree.
Which option you choose depends entirely on your preferences.
What is this switch for? The use of the proxy makes sense, if you want to avoid that the web browser accesses the service as a client directly, which is the default for OpenLayers based applications. If this switch is activated, Mapbender accesses the service from its own URL, processes the images and displays them on the map. With that it is easy to provide a network-protected service secured by firewalls that can only be accessed by the web server on which Mapbender is running.
Tiling, map-size and performance¶
The “Tiled” parameter is used to request the map image in individual tiles rather than as a whole image. This should be turned on in general, if you use Mapproxy to provide a tiled service. But it also makes sense for normal, un-tiled services, since the perceived waiting time for the user gets lower: The map image appears, although not all tiles have been retrieved yet.
But you have to keep in mind: The number of requests to a WMS increases rapidly: Depending on the screen resolution and the set tile size in the Map element many requests are sent to the server. Although the returned images are not very large (usually you set tile sizes of 256x256 or 512x512 pixels), but large in numbers. This is also valid in regard to the tile buffer. So it’s a trade-off and a case-by-case distinction how to address the service. The performance can also be increased by setting the scales of a layer in the layerset-instance.
There exist also some WMS services that support only a maximum image size that cannot be used with the high resolutions request Mapbender can call. The Fullscreen template can be sized to the maximum screen width and the requested map image is then approximately the width and height of the visible browser window.
Vendor Specific Parameter¶
In a layererset instance, vendor specific parameters are appended to the WMS request. The implementation follows the specifications of the multi-dimensional data in the WMS specification. In Mapbender3, the vendor specific parameters can be used to append user and group information of the logged-in user to the WMS request. Fixed values can also be transmitted. The following example shows the definition of a parameter “group”, which as content passes on the group of the user currently logged into Mapbender.
- Name: parameter name in WMS request.
- Default: default value.
- Vstype: Mapbender specific variables: group, user (users), simple.
- Hidden: If this value is set, the requests are sent on the server so that the parameters are not directly visible.
Currently, the item is useful for passing the service on only to specific users and groups. This happens e.g. for users via the
$id$ and for groups via the parameter